Tag Archives: pnwcontour

2019 PNW Contour Group Annual Meet

IMG_2591

I’m at it again…tossing my suitcase in the trunk and hitting the open road across the country in an old hooptie — with a AAA card handy.

This time though, things are a little different. I’m going to a car meet. I’ve been a member of many car clubs over the years (Bimmer Forums, ZHP Mafia, Club RSX, Drive Accord, Acurazine, Mazda6 Forums, NPORA-Nissan Pathfinder off-road Association…to name a few), but I’ve never attended any of their annual meets. Proximity, time and frankly, interest have gotten in the way of me making the jump.

Ever since the PNW Contour Group reached out to me earlier this year, I’ve been hooked and never met a nicer group of folks. This is one meet I’ll try out. It was going to be hosted in Portland, Oregon, and that was just the ticket I needed to get away from the summer heat.

IMG_3289

So, I hopped in the creaky old Ford and set out on a 3,500 mile drive to the Pacific Northwest. Aside from taking delivery in Colorado earlier this year, I haven’t had the Contour on the road for such a long journey. This would be a good test of the 21 year old cooling system in addition to all the other parts I’m unaware of their originality. Some call it crazy, some adventurous. I’d leave it as living on the edge. My route was as follows:

2019-07-31 11_26_06-Portland, OR to Las Cruces, NM - Google Maps

Maintenance and repairs for the Contour have luckily been minimal thanks to the care it’s received in the past. I’ve only had to change out the transmission fluid, recharge the A/C system, alignment, tires, and resurface the brake rotors. All my other costs have been largely cosmetic. In anticipation of this annual meet, I made sure every inch of this car was as clean as it could get and what’s left of the original paint polished and sealed.

IMG_2909

The rear bumper needed a little buffing as the clearcoat on my DIY job hadn’t retained the luster it had. I might have to have this professionally resprayed at some point. This should hold me over for now.

IMG_2907

The interior, though a little warped and brittle from 21 years of sun exposure, cleaned up pretty nice.

IMG_2904

And I managed to stow everything in the trunk leaving the backseat clean and clear. This stash even included two buckets full of detailing supplies and some random car parts I planned to give away at the meet.

IMG_2910

I hit the road on a Wednesday afternoon and planned to return the following week around the same time. This meant a fairly tight schedule of only two days driving to Portland and two days back. That was an average of 800 miles/12hrs a day. You never realize how big our country is until attempting stuff like this. My stops along the way were minimal as I’ve been on this route many times in the past.

Colorado state line

IMG_2939

Utah state line

IMG_2944

Things started greening up near Price Canyon, UT.

IMG_2955

Welcome to Idaho!

IMG_2964

I’ve seen this road many times in the past, but never tire of the lovely grassy hills of southern Idaho.

IMG_2961

First night’s stop in Twin Falls, ID. All my work on detailing the exterior went out the door due to rain showers outside of Price, UT. No biggie, that’s where those detailing supplies will eventually be handy.

IMG_2971

Next day, a short stop to view the Snake River Canyon.

IMG_2549

This is the I.B. Perrine Bridge which hangs over the Snake River. At 486 feet above the canyon floor, it’s a popular location or adrenaline junkies to jump off with parachutes.

IMG_2545

View of the Snake River from under the bridge.

IMG_2544

Several hours later, I finally arrived in Oregon!

IMG_2981

I was impressed by the determination of this little Contour. Not one issue so far. I was getting a solid 27 MPG on premium fuel even with steady 80 MPH speeds and the A/C constantly blowing.

IMG_2994

Driving along the Columbia River with Mt. Hood in the distance.

IMG_3002

Arrived in Portland. The meet was going to take place here at the Hilton Garden Inn near the airport.

IMG_3004

As I arrived a day early, first order of business was cleaning off the grime I accumulated over the last two days. The plan was to complete some photo ops prior to attending the actual meet on Sunday. A quick Google search for a credit card friendly, self-serve car wash led me to one about seven miles over the river to Vancouver, WA. Check out that insect homicide scene!

IMG_3011

This is where bringing my own detail supplies came into play. I only utilized the high pressure water.

IMG_3010

Dinner at Shari’s where I gorged in breakfast for dinner…a chicken fried steak with eggs.

IMG_3016

The following day was going to be mine to explore. The boys had an autocross event 90 miles away, but since I have neither the reaction time or any desire to put that kind of stress on the Contour, I chose to head west and enjoy the PNW in all its glory. Here’s a photo one of the members sent me. I have to admit, I did feel like I was missing out!

IMG_3242

However, I did have the beach and rain forests calling my name, so I proceeded with the plan.

IMG_2556IMG_2565

I caught highway 26 leading out of Portland to Seaside.

IMG_3023

Entering rain forest territory. This is what makes this desert boy happy.

IMG_3136IMG_3041IMG_3138

Short hike on the Four County Point Trail.

IMG_3163

IMG_3156IMG_3152

Then, I drove until I ran out of land. This is Sunset beach outside of Seaside, OR where I’ve taken my Accord and Mazda6 for similar photo shoots. Now, it was the Contour’s turn.

IMG_312298 CSVT - PawelaIMG_3065IMG_3069IMG_3110

Of course, who could resist a few little innocent donuts in the sand?

IMG_3118

Lunch was in Seaside at Ruby’s Roadside Grill. I tried their albacore tuna fillet melt which was out of this world!

IMG_3129

After my day of clowning around the beach and trails, I headed back to Portland where the gang was starting to trickle in for the night. We had a roped off parking area behind the hotel. This was my first time meeting everyone in person, and I couldn’t have asked for a more warm welcoming.

IMG_3165IMG_3169

A look from my hotel window as I was winding down for the evening.

IMG_3171

The morning of the official meet. Many of us were out at the crack of dawn vacuuming, polishing, dusting, and staging our cars. I live for this kind of stuff.

IMG_3185

Some minty seats I bought off a fellow member to eventually replace a few of mine that are pretty well weathered.

IMG_3186

This silver beauty next to me belongs to JD out of Phoenix, AZ. What are the chances we share the same vanity plates?!

IMG_3170

Alex (in blue) had his car featured in The Smoking Tire SVT Contour review

IMG_3189

All polished up and ready. See that gent in the cowboy hat? That’s Greg from California. He’s a proud owner of 11 Contours! Much respect.

IMG_3535

IMG_3195

Some of the interiors were pretty wild. This SVT had the dash and console swapped from a Mercury Mystique to add a touch of luxury.

IMG_3210

Fully decked out here with red pipping, carbon fiber, and Momo steering wheel just to name a few…

IMG_3212

Next item on the itinerary, we headed indoors to our reserved conference room.

IMG_3203

A lot of action in here. This is where t-shirts were distributed, member story presentations given, raffles, awards, behind-the-scenes of the club and a game of Jeopardy!

IMG_3200

IMG_3539

T-shirts.

IMG_3201

Chicken fajita buffet for lunch.

IMG_3202

Back outside for voting.

IMG_3206

Hoods up if you want consideration for best engine bay award. I left mine down.

IMG_3211IMG_3213

Rearranging the cars for a group photo.

IMG_3220

Photo credit here: Alexander Davis

IMG_3534

Totally unexpected, but I managed to bring home two awards, Best Exterior and Farthest Traveled.

IMG_3292

Going Home:

The meet was over around 3:30 pm which provided ample time to gain some ground for that night’s scheduled stop in Baker City, OR. I then continued on the same route where I’d spend the last night in Green River, UT.

IMG_3231

Quick stop for lunch with my buddy Josh in Bosie, ID.

IMG_3245

Views near Moab, UT

IMG_3263

I tried something different for my last night on the road in Green River. I swapped the comfy hotel accommodations for a more primitive, yet charming KOA cabin.

IMG_3253

Good thing I brought my own blankets and pillow! Luckily, KOAs and most other camp grounds have wifi these days. My sanity was preserved.

IMG_3254

Back in New Mexico!

IMG_3270

Continental Divide at 7,275 feet above sea level.

IMG_3276

Last leg of the journey.

IMG_3283

Home safe and sound! Aside from having to add a little oil, the Contour was very well behaved on the trip. It didn’t skip a beat even with some 100+ degree heat, heavy cross winds, rain, bumper-to-bumper traffic in Salt Lake City, or steep inclines I encountered. Thank you for coming along for the ride. Notice a little garage preview here of what’s to come in the next post. Stay tuned!

IMG_3376

Tagged , , , , , , , ,

Pacific Northwest 2019 Planning

35658793240_7be29a0349_o

If any of you follow this blog somewhat closely, you’ll find that I’m a big fan of the Pacific Northwest. The plethora of thick, green rain forests and majestic coastline are pure bliss to me. I haven’t been here since 2016 when I was on my way back from Alaska. I’m overdue a trip. This year, I had a little push to go as a result of joining a great group of Contour enthusiasts, the Pacific Northwest (PNW) Contour Group.

2019-PNW-Contour-Logo-B

The admin, Satya, reached out to me shortly after my YouTube video posted and since then, I’ve connected with some really great guys. Thanks to these connections, I’ve been able to source some rare and discontinued parts for the Contour as well as gain some very useful technical knowledge. This group hosts annual meets/drives and this year will be their 5th anniversary meet in Portland. When I was invited, there was no hesitancy in planning for the 4,000 mile drive to attend. Here are a few photos from their past events.

IMG_1031IMG_1857

IMG_2034

I am amazed of the cult following these Contours (and twin Mercury Mystique’s) have. A lot of the internet forums have become a bit stale, however social media groups are still very much alive and have members ranging from ages 16 to 60. The PNW Contour group is one of the newest groups and they include owners from all over the west side of the country. I definitely like the culture.

You may find it surprising that despite my interest in cars and connecting with  enthusiasts, I’ve never participated in a car meet or show. Ever. This should be fun. So in July, I will be taking the old Contour to Portland for its first ever long journey to meet the guys and get my “fix” for some PNW scenery.

Restoration Updates:

I’m getting the Contour cleaned up little by little and this July drive is going to push things along a bit. I recently booked an appointment to get the roof resprayed and the PDR (paintless dent removal) to remove the hail damage has been completed. For that job, I took it to Eric Truster of Dent Specialties of El Paso, TX. As old and brittle as the interior trim pieces are, he managed to disassemble everything and pull down the headliner to gain access to the roof without one scratch or broken tab. That’s why I call him the “wizard.”

IMG_0549

The 21 year old paint is quite fragile, so Eric used his special techniques to heat the surface up to get the paint pliable enough for all the pushing and pulling of the sheet metal.

IMG_0304IMG_0959IMG_0968

The entire job took a little over a week and now all the body panels are free of dents as they should be!

Next update is my rear bumper DIY work. No signs of cracking or bubbling, so we might be good to go for a while. I wet-sanded the new clear coat a tad, then compounded to level it all out to match the factory finish. So much better than before.

IMG_0330IMG_0331

Next, I repaired and tightened up the bolts on the the rocker panels as best I could. I also sourced some used jack point covers that I had to paint. Unfortunately, the color isn’t an exact match, but it should hold me over until I can find some factory painted Toreador Red ones.

Before (pardon the filth):

IMG_5616

After:

IMG_5620

IMG_1026IMG_2446

Now on to a little detail which I’m very pleased with. When I first drove this car home, I noticed some sticker remnants on the windshield’s passenger side. It was clearly old and looked bad and it bugged me. However, as this windshield is original to the car, it must have been something somewhat significant, so I held back on cleaning it off until I found out what it was. A bit of research online revealed it used to be the assembly plant sticker Ford would include on all their new vehicles. After finding this particular model came from the Kansas City assembly plant, I sent off a letter to Ford requesting a replacement if that could be done. A few weeks later, one came in the mail!

IMG_0898

I’m glad I didn’t clean off the old one as it served as a template.

IMG_0900

As of now, I’m doing repairs on the sunroof motor to try and get that working as well as source a replacement driver’s visor. I’m going to have to look into the A/C soon too as it doesn’t seem to be working.

Interview with the 1st Owner:

Around the same time I sent the letter to Ford, I also sent a note to the original owner of the Contour in hopes I could hear his story. I had the address and phone number on old service records. The phone number ended up being a dead end, so sending a letter was going to be my last try. I introduced myself, included some recent photos of the car and asked if he’d be willing to contact me. To my surprise, I got a call! I was thrilled and even though the conversation lasted less than ten minutes, I got all the info I was looking for and quickly realized that this car had been well cared for. Here are some notes from the conversation:

  • Bought new in 1997 for $24k
  • Had engine rebuilt around 100,000 miles from a rod bearing going bad (common issue)
  • Original alternator
  • Original transmission
  • Original power steering
  • Original radiator
  • Clutch replaced with performance unit while engine was out…not needed but replaced anyway
  • Replaced fuel pump
  • Had no idea when the hail damage happened
  • Garage kept, but in the sun during week days at work
  • Majority of miles were local to Ft. Collins and Denver
  • Wife daily drove it from new (very conservatively)
  • Exhaust, headers and intake were upgraded around the time of the engine rebuild
  • Sold because he had 6 vehicles
  • Spent roughly $7,000 in maintenance, repairs and upgrades

I can’t imagine keeping one car for over 20 years, but I salute him for his dedication. That’s a wrap for now. Stay tuned as I’ll report back with some new announcements and festivities coming up. Drive on!

IMG_0996

 

 

Tagged , , , , ,